News Feed

We will be closed on Friday (29), Saturday (30) and Monday (2) – This bank holiday weekend, Sorry for any inconvenience this may cause. We will be back open from 7.15am on Tuesday 3 May  

We would like to wish all our customers a very Happy Christmas and a peaceful and happy New Year. We will be closing for Christmas at 5.00 pm on Wednesday 23rd December 2015 and will re-open at 7.00 am on Monday 4th January 2016,    

There has been some major changes to the MOT system and rules in the last year, We have now moved over to a website based MOT system so information is available on-line straight away. The bad points – They introduced a new ruling that states you can’t drive a car that has

We will be closed on Monday 27th July 2015 owing to a family wedding.   We will be open on Tuesday 28th July as normal. Apologies for any incovenience caused

The Heater in the workshop had been playing up and the automatic switch on/off off the blower fan had stopped working. Taking the heater apart the fault could be seen that the capillary tube was leaking, this sticks into the heater and when warm enough pushes and mechanical switch and

You can now check your MOT and Road tax expiry dates using the GOV.UK website. You only need the Registration number and Make of Car Click this link to be taken the GOV.UK website to check your car

DG Motor Services Ltd would like to wish all our customers a Merry Christmas and a Happy New Year. We will be shut from 17.15 on Tuesday 23 December 2014 and will re-open on Monday 05 January 2015 Tues 23 DEC   8.00 – 17.15 Closed till MON 05 JAN – 08.00 – 17.15

Audi TT 2.0 TFSI Problem: Car wouldnt start, run for about 1 second and then cut out. After starting with a full autoscan and checking for faults expecting to see immobilizer faults,  no faults were found relating to the immobilizer just a low fuel pressure one.    Now we needed to ch

VW T5 Transporter 2.5 TDI AXD engine.   Problems:  Engine wouldn’t start but the engine would crank over fine. We started with a full auto scan this showed a fault code off – 16725 – Camshaft Position Sensor (G40) – P0341 – 000 – Implausible Signal.